1. Hydrostatic transmission
(T2290KWT)
Checking oil level: Be sure to check the oil level when
the transmission is cold. Remove the oil level check
port. The correct level should be even with the bottom
of the port.
If necessary to add oil, remove breather tube and add
from top port plug. Be sure to use correct oil which is
specified in the table in LUBRICANTS AND FUEL on
page 40.
(1) Oil level
(2) Top port plug
(3) Oil level check port
LUBRICANTS AND FUEL MAINTENANCE
T2090BR-AU,T2290KW-AU,T2290KWT-AU
To Next Page
Loading...
Need help?
General
