LUBRICANTS AND FUEL
Place
Capacities
Lubricants
T2090BR
T2290KW,
T2290KWT
Engine crankcase
1.9 L
(2.0 U.S.qts.)
2.1 L
(2.2 U.S.qts.)
• Engine oil: API service classification SG, SH, SJ or higher
Above 10 ℃ (50 ℉) ... SAE30
Between -18 ℃ (0 ℉) to 38 ℃ (100 ℉) ... SAE10W-30
Below 0 ℃ (32 ℉) ... SAE5W-30
Hydrostatic transmission
(T2290KWT)
2.7 to 2.75 L
(2.85 to 2.9 U.S.qts.)
• Engine oil: API service classification SL
SAE 20W-50
Seat adjuster
Moderate amount • Oil or spray type grease
Throttle cable
Mower link
Fuel tank 13.6 L (3.6 U.S.gals.)
• Automobile unleaded or regular gasoline
• Unleaded gasoline 87 octane or higher
NOTE :
• Engine oil:
Oil used in the engine should have an American Petroleum Institute (API) service classification and
proper SAE engine oil according to the ambient temperatures as shown above.
• Indicated capacity of oil are manufacture's estimate.
• Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by volume) or Methyl Tertiary Butyl Ether
(MTBE) and unleaded gasoline blends (up to a maximum of 15% MTBE by volume) are approved for the
engine. Other gasoline/alcohol blends are not approved.
MAINTENANCE LUBRICANTS AND FUEL
T2090BR-AU,T2290KW-AU,T2290KWT-AU
To Next Page
Loading...
Need help?
General
