EasyManuals Logo

KYMCO 200 User Manual

KYMCO 200
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
26
PRI - Fuel level inspection / Refilling
To open the fuel filler cap:
1. With the engine “OFF”, place the scooter on its main stand
and open the seat (see page 14 of this manual).
When the fuel level gauge needle approaches “E” (indicating
the tank is nearly empty), refill the tank with unleaded gasoline.
Do not overfill the tank. There should be no fuel in the
fuel filler neck. Excess fuel can contaminate the evapo-
rative emission canister, resulting in poor drivability.
Gasoline is highly flammable and explosive. You can be
burned or seriously injured while handling fuel.
* Stop the engine and keep heat, sparks, and flame away.
* Refuel only outdoors.
* Clean up fuel spills immediately.
2. Rotate the cap 1 counterclockwise to access the fuel filler 2.
3. Add fuel (per the recommendations listed here).
4. Replace the fuel filler cap 3 and secure it to the fuel filler
by rotating clockwise. Close the seat.
OPERATION
Fuel recommendation
Use unleaded gasoline with a research octane number of
91 or higher. Unleaded gasoline will extend spark plug life.
11
11
1
22
22
2
33
33
3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO 200 and is the answer not in the manual?

KYMCO 200 Specifications

General IconGeneral
Front SuspensionTelescopic Fork
Front BrakeDisc
Seat Height780 mm
Starting SystemElectric
TransmissionCVT

Related product manuals