49
MAINTENANCE
Air cleaner filter element
The air cleaner filter element should be serviced at regular
intervals. Service the element more often when riding in un-
usually wet or dusty areas.
1. Remove the six air cleaner cover screws 1.
2. Remove the air cleaner case cover 2.
4. Remove the air cleaner element (air filter) 3.
Improper installation of the filter can cause water or dirt
to enter the engine, causing premature wear.
Using the wrong air cleaner element or a non-KYMCO air
cleaner element which is not of equivalent quality may
cause premature engine wear or performance problems.
11
11
1
22
22
2
33
33
3
5. If lightly soiled, clean the filter 4 with compressed air. If very
dirty (or if the filter is at the replacement interval per the main-
tenance schedule) discard the air cleaner element.
6. Install the cleaned or new air cleaner element. Use a KYMCO
genuine air cleaner element or an equivalent air cleaner ele-
ment specified for your scooter.
7. Complete the installation by reinstalling the air cleaner parts in
the reverse order of removal.
44
44
4
To Next Page
Loading...
Need help?
General
