KYMCO 200 User Manual

59
Removal from storage
1. Uncover and clean the scooter.
2. Change the engine oil if more than 1 month has passed
since the start of storage.
3. Charge the battery as required (use a quality charger de-
signed for use on a maintenance-free type battery). Install
the battery.
4. Drain any excess aerosol rust-inhibiting oil from the fuel
tank. Fill the fuel tank with fresh gasoline.
5. Perform all the pre-ride inspection checks (see pages 23 -
33). T
est ride the scooter at low speeds in a safe riding
area, away from traffic.

KYMCO 200 Specifications

General

Front Suspension	Telescopic Fork
Front Brake	Disc
Seat Height	780 mm
Starting System	Electric
Transmission	CVT