32
PRI - Chassis inspection
Complete the pre-ride inspection of your scooter by checking
items on its chassis.
OPERATION
The horn is an essential safety item, as it alerts other
traffic to your presence.
The headlight must be in good working order to illumi-
nate your riding path at night.
The tail/brake light is required so other traffic can see
your scooter and be alerted to your intention to stop or
slow down.
The turn signals indicate your turning intentions.
Because all of these systems are vital safety items, con-
tact your KYMCO dealer for replacement bulbs or elec-
trical system repair should there be any malfunctions.
4. Turn the ignition switch to “ON - “ and press the horn
button 7 to make sure the horm sounds.
77
77
7
Front suspension & rear shock absorber: Check the
operation of the suspension by pressing down on the
handlebars and seat. Make sure the suspension returns in
a smooth fashion.
Brake lever operation: Check that the rear brake (left le-
ver) and the front brake (right lever) have pressure and
lock the wheels when you squeeze them.
Mirrors: Adjust the mirrors while seated on the scooter
BEFORE you begin riding.
To Next Page
Loading...
Need help?
General
