4-35
Operation Panel
Oficio II
8K
16K
ISO B5
Custom
(#1): Only be used in Cassette 1.
5
Press or to select the desired paper size.
6
Press [OK]. The paper size for the cassette is set and the Cassette
# Set. menu screen reappears.
If you selected Custom in step 4, use the procedure below to specify
the paper length and width.
Custom PaperSize (Setting a Custom Paper Size)
In the procedure below, select the units to be used for entering the custom paper size and then enter the paper width and
length. As shown in the figure, enter the Y and X values for the paper size, using the selected units.
1
In the Cassette # Set. menu, press or to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
2
Press [OK]. The Custom PaperSize menu screen appears.
3
Press or to select Measurement.
Note
When Custom is selected, it is possible to enter the
paper size. For details, refer to Custom PaperSize (Setting a
Custom Paper Size) on page 4-35.
X Dimension
Y Dimension
Cassette:
105 to 297 mm (4.13 to 11.69 inches)
Paper Feeder PF-4100:
148 to 297 mm (5.83 to 11.69 inches)
Cassette:
148 to 432 mm (5.83 to 17.00 inches)
Paper Feeder PF-4100:
210 to 432 mm (8.27 to 17.00 inches)
To Next Page
Loading...
Need help?
General