4-45
Operation Panel
Override A4/LTR (Overriding difference between A4 and Letter)
When the Override A4/LTR is turned On using the operation panel, the printer ignores the difference between A4 and
Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs
from the paper size formatting the job.
By default, this feature is On.
1
In the Print Settings menu, press or to select Override
A4/LTR.
2
Press [OK]. The Override A4/LTR screen appears.
3
Press or to select Off or On.
4
Press [OK]. The Print Settings menu reappears.
Emulation (Setting the emulation)
You can change the emulation mode. Use the procedure below to select the mode.
1
In the Print Settings menu, press or to select Emulation
Set..
2
Press [OK]. The Emulation Set. menu screen appears.
3
Press or to select Emulation.
4
Press [OK]. The Emulation screen appears showing a list of the
available emulations. The defaults differ depending on the delivery
destination.
The available emulations are as follows:
PCL6
IBM Proprinter
EPSON LQ-850
Line Printer
KPDL
KPDL(Auto)
5
Press or to select the desired emulation.
6
Press [OK]. The emulation is set and the Emulation Set. menu
reappears.
To Next Page
Loading...
Need help?
General