Kyocera ECOSYS FS-2100D User Manual

Operation Panel
4-48
The letter before the number indicates the location of the font, as
shown below.
I: Internal font
S: Soft (downloaded) font
M: Fonts in optional SD card
H: Fonts in RAM disk or optional SSD
10 Press [OK]. The default font is set and the Font menu reappears.
Selecting Regular or Dark Courier/Letter Gothic
Courier or Letter Gothic font thickness can be selected as Regular or Dark. In the procedure below, it is assumed that
Courier is selected. The procedure is the same for Letter Gothic.
1 In the Print Settings menu, press  or  to select Font.
2 Press [OK]. The Font menu screen appears.
3 Press  or  to select Courier. If you are selecting the thickness
of the Letter Gothic font, choose Letter Gothic here instead.
4 Press [OK]. The Courier screen appears.
5 Press  or  to select Regular or Dark.
6 Press [OK]. The font thickness is set and the Font menu reappears.
Changing the Default Font Size
You can change the size of the default font. If you selected a proportional font, the character size can be changed.
1 In the Print Settings menu, press  or  to select Font.
2 Press [OK]. The Font menu screen appears.
3 Press  or  to select Size.
4 Press [OK]. The Size entry screen appears.
5 Press  or  to enter the font size.
Font:
Courier
Exit
03
Font ID
02
01
Font Type
Courier:
Regular
01
Dark
02
*
Font:
Courier
Exit
03
Font ID
02
01
Font Type
Size:
12.00
(4.00  999.75)
point
Note The font size can be set between 4.00 and 999.75
points, in 0.25-point increments.

Kyocera ECOSYS FS-2100D Specifications

General

Brand	Kyocera
Model	ECOSYS FS-2100D
Category	Printer
Language	English