Kyocera ECOSYS FS-2100D User Manual

4-81
Operation Panel
2 Press [OK]. The Buzzer screen appears.
Key Confirmation (Key confirmation tone setting)
When On is selected in this setting, a tone sounds each time a key is used. The default setting is On.
1 In the Buzzer menu screen, press  or  to select Key
Confirmation.
2 Press [OK]. The Key Confirmation screen appears.
3 Press  or  to select whether the key confirmation tone is enabled.
4 Press [OK]. The key confirmation tone setting is set and the Buzzer
menu reappears.
Job Finish (Job completed tone setting)
When On is selected in this setting, a tone sounds when printing ends. The default setting is Off.
1 In the Buzzer menu screen, press  or  to select Job Finish.
2 Press [OK]. The Job Finish screen appears.
3 Press  or  to select whether the printing completed tone is
enabled.
4 Press [OK]. The printing completed tone setting is set and the
Buzzer menu reappears.
Ready (Preparation completed tone setting)
When On is selected in this setting, a tone sounds when print preparation has been completed. The default setting is Off.
1 In the Buzzer menu screen, press  or  to select Ready.
2 Press [OK]. The Ready screen appears.
3 Press  or  to select whether the preparation completed tone is
enabled.
4 Press [OK]. The preparation completed tone setting is set and the
Buzzer menu reappears.
Buzzer:
Ready
Exit
03
Job Finish
02
01
Key Confirmation
Key Confirmation:
Off
01
On
02
*
Job Finish:
Off
01
On
02
*
Ready:
Off
01
On
02
*

Kyocera ECOSYS FS-2100D Specifications

General

Brand	Kyocera
Model	ECOSYS FS-2100D
Category	Printer
Language	English