Operation Panel
4-96
2
Press [OK]. The Login screen appears.
3
With the Login User Name entry field selected, press [OK]. The
Login User Name entry screen is displayed.
4
Enter the Login User Name using the numeric keys then press [OK].
The log in screen reappears.
5
Press or to select the Login Password entry field.
6
Press [OK]. The Login Password entry screen is displayed.
7
Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
8
Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the TonerAlert Level menu
screen appears.
9
Press or to select Off/On.
10
Press [OK]. The Off/On screen appears.
11
Press or to select whether Toner Alert Level is enabled.
Note
When user login administration is set:
• When logged in as an administrator, the log in screen is
not displayed and the TonerAlert Level menu screen
is displayed.
• The setting is not possible when logged in as anyone other
than an administrator. Log in again as an administrator.
Note
The initial setting for the administrator's Login User
Name is "4000".
For details on entering characters, refer to Character Entry
Method on page A-2.
Note
The initial setting for the administrator's Login
Password is "4000".
For details on entering characters, refer to Character Entry
Method on page A-2.
To Next Page
Loading...
Need help?
General