9-23
Setup, Registration, and User Management > System Menu
LAN Interface
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
RAM Disk Setting
SMTP Security Select the communication protocol according to the type of security employed by the SMTP
server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security (User 1) Select the communication protocol according to the type of security employed by the POP3
server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security (User 2)
POP3 Security (User 3)
* After changing the setting, restart the system or turn the machine OFF and then ON.
** LDAP must be set to [On] in Protocol Detail on page 9-21.
Item Description
LAN Interface Specify the settings for the LAN interface to be used.*
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
USB Host This locks and protects the USB memory slot (A1) or USB port (A2) (USB host).*
Value: Unblock, Block
* After changing the setting, restart the system or turn the machine OFF and then ON.
USB Device This locks and protects the USB interface connector (B1) (USB Device).*
Value: Unblock, Block
USB Storage This locks and protects the USB memory slot (A1).*
Value: Unblock, Block
Optional Interface 1 This locks and protects the optional interface slots (OPT1 or OPT2).*
Value: Unblock, Block
Optional Interface 2
Item Description
RAM Disk Setting A RAM disk can be created and its size can be set. Creating a RAM disk makes it possible to
print from a Job Box.*
Value
RAM Disk Setting: Off, On
RAM Disk Size: The setting range varies depending on the amount of memory installed and the
main memory usage setting.
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
To Next Page
Loading...
Need help?
General