Kyocera ECOSYS M2030dn/PN User Manual

2PK/2PL/2PM/2PN-8
1-4-8
0180 Machine number mismatch
Machine number of main and engine
does not match.
The main PWB
or the engine
PWB were
exchanged.
U004 Setting the machine number
(See page 1-3-13).
Data damage of
control PWB
EEPROM (U17).
Contact the Service Administrative Divi-
sion.
0420 Paper feeder communication
error
Communication error between con-
trol PWB and optional paper feeder.
Improper installa-
tion paper
feeder.
Follow installation instruction carefully
again.
Defective har-
ness between
control PWB
(YC30) and
paper feeder
interface connec-
tor, or improper
connector inser-
tion.
Reinsert the connector. Also check for
continuity within the connector har-
ness. If none, remedy or replace the
harness.
Defective control
PWB.
Replace the control PWB (See page 1-
5-37).
Defective har-
ness between PF
main PWB (YC5)
and paper feeder
interface connec-
tor, or improper
connector inser-
tion.
Reinsert the connector. Also check for
continuity within the connector har-
ness. If none, remedy or replace the
harness (Refer to the service manual
for the paper feeder).
Defective PF
mainPWB.
Replace the PF main PWB (Refer to the
service manual for the paper feeder).
0830 FAX control PWB flash program
area checksum error
A checksum error occurred with the
program of the FAX control PWB.
Defective fax
software.
Install the fax software.
Defective FAX
control PWB.
Replace the FAX control PWB (See
page 1-5-48).
0840 Faults of RTC
When no normal communication is
available with RTC.
RTC data is mismatched due to
dead battery, etc.
Defective control
PWB.
Replace the control PWB (See page 1-
5-37).
The battery is
disconnected
from the control
PWB.
Check visually and remedy if necessary.
Code Contents
Remarks
Causes
Check procedures
/corrective measures

Kyocera ECOSYS M2030dn/PN Specifications

General

Brand	Kyocera
Model	ECOSYS M2030dn/PN
Category	All in One Printer
Language	English