Using the Operation Panel 4-55
Print Settings
These settings specify the following printing parameters: paper feed
source, paper feed mode, duplex printing, override A4/LTR, emulation
mode, color mode, print quality, and setting pagination.
• Paper Source (Selecting the paper feed source)
• Paper Feed Mode (Setting the paper feed source)
• Duplex (Setting the duplex printing)
• Paper Output (Selecting the Paper Output Location)
• Override A4/LTR (Overriding difference between A4 and Letter)
• Emulation Set. (Setting the emulation)
• Color Mode (Selecting color or black & white printing)
• Print Quality (Selecting the EcoPrint mode)
• Page Setting (Setting pagination)
1 Press [MENU].
2 Press U or V to select Print Settings.
3 Press [OK]. The Print Settings menu appears showing a list of
available options.
Paper Source (Selecting the paper feed source)
You can select the paper source from which the printer feeds paper as the
default. If an optional paper feeder(s) is installed, it can also be set the
default paper source.
1 In the Print Settings menu, press U or V to select Paper Source.
2 Press [OK]. The Paper Source screen appears showing a list of
the available paper sources.
The available paper sources are as follows:
MP Tray
Cassette 1,2 (printer's standard paper cassette)
Cassette 3,4 (optional paper feeders (only installed paper feeders
are shown))
3 Press U or V to select the desired paper source.
4 Press [OK]. The paper source is set and the Print Settings menu
reappears.