24
Examples of Use
The following sets the A3-size paper to be counted as two sheets (double count):
!R! ACNT “ADMN”, “123456789012345”;
ACNT “CTMD”, “SIZE”, 10, 2;
ACNT “EDAD”;EXIT;
The following sets the count that uses the number of sheets.
!R! ACNT “ADMN”, “123456789012345”;
ACNT “CTMD”, “BLPG”, 0, 1;
ACNT “EDAD”;EXIT;
Description
• SIZE: count according to paper SIZE
• BLPG: BLank PaGe count mode
• A count using the number of pages counts the number of pages actually printed,
while a count using the number of sheets counts the number of sheets used
regardless of whether or not they are used for printing.
• Count setting by paper size and count setting by number of pages/sheets are added
together when counted. Therefore, if a print job for two double-sided, A3-sized
pages with attributes of double count and number of pages is executed, the counter
for the account is incremented by four, even though the actual number of sheets
used is just one.
• The count method can be set between the ACNT “ADMN”, and ACNT “EDAD”;
commands.
• The following table shows whether or not the count method setting is supported and
default values for each paper size.
To Next Page
Loading...
Need help?
General
