4
Chapter 1 Overview of the Accounting System
Accounts or users that may use the printer can be limited by registering account codes
in advance. The amount of paper used by each registered account code can be tracked,
so it is easy to manage separately billing and the amount of paper used by each
account.
An account code must first be registered to the printer in order to operate the system.
In addition, an account code is selected to start printing so that the printer can
separately store the number of printed pages used by each account.
A printer with a registered account code can only print data from PCs that specify the
same account code. For example, as shown in the figure, printers A and B in the sales
department are set to account code 100 and can only print data from computers in the
sales department that specify account code 100. These computers cannot output data to
printers in the planning department since their account code is set as 9999, even
though they are connected to the same network. In addition, printers with a set account
code cannot print data unless an account code is specified.
Account code 100 specified.
Printer B
(account code: 100)
Printer A
(account code: 100)
Printer C
(account code: 9999)
[planning department]
account code: 9999
[sales department]
account code: 100
To Next Page
Loading...
Need help?
General
