Accounting System Settings Guide
Chapter 3 Error Messages
33
Chapter 3 Error Messages
This section presents the accounting system related error messages which may appear
during printing, and describes how to respond to these errors.
If you are unable to solve a problem, contact the Kyocera Mita Corporation authorized
dealer where you made your purchase or contact our customer service center.
The account code may not have been set for the transmitted job, or the specified
account code may not be registered (or an incorrect account code may have been
specified).
Press [GO] to clear the error. Check whether an account code has been specified or
whether the correct account code was specified, then try printing again.
The maximum number of copy pages set for a particular account has been exceeded.
Press [GO] to clear the error. Jobs cannot be printed in excess of the maximum number
of copy setting.
A syntax error or incorrect setting may have been entered during accounting system
setup using PRESCRIBE command. The two pound-sign characters in the Account
error ## line denote the error number. For details on error numbers, see Error
numbers for account errors on the next page.
Press [GO] to clear the error. Check whether the correct PRESCRIBE command was
entered.
Illegal Account
Press GO
Exceeded MaxCopy
Press GO
Account error ##
Press GO
To Next Page
Loading...
Need help?
General
