Accounting System Settings Guide
Chapter 2 Setting Up the Accounting System
29
Examples of Use
Set itemized paper counter 3 to “Letter” paper size and “Treated paper” paper type.
!R! ACNT “ADMN”, “123456789012345”;
ACNT “ATRC”, 3, 6, 14;
ACNT “EDAD”;EXIT;
Count itemized paper counter 5 as an unused counter.
!R! ACNT “ADMN”, “123456789012345”;
ACNT “ATRC”, 5, 0, 0, 0, 0;
ACNT “EDAD”;EXIT;
Description
• Sets the itemized paper counter between the ACNT “ADMN”; and ACNT “EDAD”
commands;.
• If paper which does not meet the conditions for any of the itemized paper counters,
1 through 5 is printed, then the count on counter 6 (“other”) is incremented.
• If a counter has a specified paper size but no paper type setting, all prints at the
specified paper size are counted, regardless of the paper type.
• If a counter has a specified paper type but no paper size setting, all prints with the
specified paper type are counted, regardless of the paper size.
• To determine which counter is applicable, the paper size and paper type are
determined starting with the first counter and continuing in sequence. If none of the
counters 1 through 5 are applicable, then the count is applied to the “other” counter.
• If multiple counters have the same settings, the count is incremented only on the
counter having the lowest number. For example, if the first counter is set to plain
paper with no paper size setting, and the second counter is set to plain paper with
A4 size, only the count on the first counter will be incremented even during A4/
plain pages printing. (Counters with no settings should be moved to the rear.)
• If a counter has no settings at all, its count is not incremented. (The counter is
treated as unused.)
• The default settings for the itemized paper counters are as follows.
Counter Number12345
Europe A3 A4 A5 Legal Letter
US Ledger Legal Letter
Statement
(No
setting)
To Next Page
Loading...
Need help?
General
