Lantronix CoBox-Micro User Manual

Network Configuration Using a Telnet Connection Configuration
7-2
3 Use the menu to navigate to subpages where you can configure server settings.
Figure 7-2: Web Manager Interface
Network Configuration Using a Telnet
Connection
To configure the Device Server over the network, establish a Telnet connection to port
9999. From the Windows Start menu, click Run and type the following command, where
x.x.x.x is the IP address and 9999 is the Device Server’s fixed network configuration port
number.
Figure 7-3: Network Login Using Telnet
Note: Be sure to include a space between the IP address and 9999.
Serial Configuration
For local configuration, a terminal or a PC running a terminal emulation program can be
connected to the Device Server’s serial port. The terminal (or emulation) should be
configured for 9600 baud, 8-bit, no parity, 1 stop bit, and no flow control.
telnet x.x.x.x 9999
Menu

Lantronix CoBox-Micro Specifications

General

Brand	Lantronix
Model	CoBox-Micro
Category	Server
Language	English