Lantronix EDS4100 Reference Manual

3: Summary of CLI Commands
EDS Device Servers Command Reference 11
Enable Menu Command Description
kill ssh <session>
Closes an SSH session.
<session> = session number in the index displayed by the
show sessions command.
kill telnet <session>
Closes a Telnet SSH session.
<session> = session number in the index displayed by the
show sessions command.
line <line>
Displays the configuration menu for the specified serial
port.
<line> = number of the line (serial port)
no clear interfaces
counters
Restores the interface counters to the last aggregate
value.
no clear query port
counters
Restores the query port counters to the last aggregate
value.
no clear xsr counters
Restores the XML Status Record counters to the last
aggregate value.
nslookup
Looks up host information for the given host name.
nslookup <host>
Displays host information for a specified host name.
<host> = IP address of the host whose information you
want to view.
ping <host>
Pings the host destination five times with a 5-second
timeout
<host> = IP address of the host you want to ping.
ping <host> <count>
Pings the host destination a specified number of times with
a 5-second timeout.
<host> = IP address host you want to ping.
<count> = number of times the specified host is to be
pinged.
ping <host> <count>
<timeout>
Pings the host destination the specified number (count) of
times with a specified timeout (in seconds).
reload
Reboots the EDS and reloads the configuration from Flash
memory.
reload factory
defaults
Resets the EDS configuration to the default settings.
show eds4100
show eds8pr
show eds16pr
show eds32pr
Displays the EDS’s configuration.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English