3: Summary of CLI Commands
EDS Device Servers Command Reference 9
Root Menu
The following parameters are top-level root commands. These commands do not alter
the configuration of the EDS. You can issue these commands from any level.
Root Configuration
Command
Description
clrscrn
Clears the screen.
enable
Displays the Enable level prompt.
exit
Exits from the system.
ping <host>
Pings the host destination the specified number of times
(count) with a 5-second timeout.
<host> = host destination.
ping <host> <count>
<timeout>
Pings the string destination a specified number of times
with a specified timeout.
<host> = host destination.
<count> = number of times the ping is to occur.
<timeout> = number of seconds that must elapse without a
response before the ping times out.
show history
Displays the set of commands inputted from the moment
user was brought back up to this menu.
show eds4100
show eds8PR
show eds16PR
show eds32PR
Displays the current EDS settings.
trace route <host>
Determines the path taken from a computer to a specified
destination.
<host> = host destination.
To Next Page
Loading...
Need help?
General