3: Summary of CLI Commands
EDS Device Servers Command Reference 16
Configure Menu
The following configurable parameters reside in the Configure menu.
Configure Menu
Command
Description
arp <ip address> <mac
address>
Maps an IP address to a device’s MAC address.
<ip address> = IP address to be mapped.
<MAC address> = device’s MAC address.
auto show icmp
Continuously displays ICMP state and statistics.
auto show ip
Continuously displays IP statistics.
auto show tcp
Continuously displays TCP statistics.
auto show udp
Continuously displays UDP statistics.
clear arp-cache
Removes all entries from the ARP table.
clear ftp counters
Sets the FTP counters to zero.
clear host <host>
Removes a specified entry from the DNS cache.
<host> = IP address of the host with the DNS cache.
clear http counters
Sets the HTTP counters to zero.
clear icmp counters
Sets the Internet Control Message Protocol (ICMP)
counters to zero.
clear ip counters
Sets the IP counters to zero.
clear ip http log
Clears the HTTP server log.
clear ip ssh counters
Sets the SSH counters to zero.
clear ip telnet
counters
Sets the Telnet counters to zero.
clear rss
Clears the RSS feed data.
clear ssh
Closes an active SSH session on the EDS.
clear telnet
Closes an active Telenet session on the EDS.
clear ssh counters
Sets the SSH counters to zero.
clear tcp counters
Sets the TCP counters to zero.
clear telnet
Closes an active Telnet session on the EDS.
clear tftp counters
Sets the TFTP counters to zero.
To Next Page
Loading...
Need help?
General