MPS/LPS User Guide 4: TCP/IP Configuration
4-9
4.
In the Start the Print Server Subsystem dialog box, type both
in the first field.
5. When the message The lpd subsystem has been started
appears, click Done.
To add a print queue:
1. From the main window, choose Print Spooling.
2. Choose Manage Print Server and Manage Print Queues.
3. Choose Add a print queue.
4. From the dialog box that appears, choose remote.
5. From the next dialog box, choose Remote Printing.
6. The Add a Standard Remote Print Queue dialog box will
appear. Enter the following information.
The name of the print queue,
The name of the MPS unit,
The name of the MPS service,
The type of print spooler on the remote server, and
A description of the printer on the remote server.
7. When the message Added print queue mps_prt appears, click
Done.
Note: If you are unable to use SMIT, see the Print Server
Reference Manual on the CD-ROM for UNIX commands used to
set up print queues.
8. Print to the queue using normal lp syntax.
Figure 8: Printing to Queue
% lp -dmps_prt filename
To Next Page
Loading...
Need help?
General
