MPS/LPS User Guide 5: NetWare Configuration
5-3
To create a print queue with the Quick Setup option:
1. Start the NetWare Administrator.
2. In the Directory Tree windows, select the context in which to
install the printer.
3. From the Menu Bar, select Tools: Print Services Quick
Setup.
4. In the Print Server Name field, enter the name of your MPS
(viewable by entering the Show Server command at the
Local> prompt).
5. In the Printer Name field, enter the name of the desired print
service configured on your MPS. For example:
MPS_xxxxxx_TEXT.
6. In the Print Queue Name field, enter the name of the print
queue to create. The name should be meaningful to you; it will
not affect MPS configuration.
7. Click Create.
8. Reboot the MPS.
PCONSOLE Print Queues
1. Log in as Admin on the file server you will be changing.
2. At the prompt, type PCONSOLE to start the utility.
For example, if your file server is mapped to the F: drive, you
would use the F: prompt.
3. From the main menu, choose Quick Set-Up.
4. When prompted by PCONSOLE, enter the information with
which to configure the print queue.
The print server name (MPS_xxxxxx),
The new printer name (service name, such as
MPS_xxxxxx_TEXT),
The new print queue name, and
The print queue volume (the name of the file server from
which the printer receives print requests). The remaining
fields can be left in their default settings.
5. Press the F10 key to save the print queue information.
6. Reboot the MPS.
To Next Page
Loading...
Need help?
General
