Lantronix MPS100 User Manual

MPS/LPS User Guide F: Frequently Used Commands
F-2
Command Option(s) Description
BOTH
Enables incoming LAT and
Telnet connections.
LAT
Enables only incoming LAT
connections.
NONE
Disables incoming
connections.
TELNET
Enables only incoming
Telnet connections.
PASSWORD
Causes the MPS to prompt
for a password for all
incoming connections.
DEFINE SERVER
INCOMING option
NOPASSWORD
Allows connections to be
established without
prompting for a password.
DEFINE SERVER IPADDRESS ipaddr
Sets the MPS’ network IP
address.
DEFINE SERVER LOADHOST ipaddr
Specifies the TCP/IP host
from which the MPS
requests its run-time code.
DEFINE SERVER LOGIN PASSWORD
Sets a new password that
will be required before
incoming logins are
accepted. You will be
prompted for the new
password (up to 6
alphanumeric characters,
case-insensitive).
DEFINE SERVER NAME “newname”
Specifies a new name for
the MPS. Names are
restricted in length; generally
a name of 11 or fewer
characters is permissible.

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English