Lantronix MPS100 User Manual

MPS/LPS User Guide F: Frequently Used Commands
F-5
Command Option(s) Description
POSTSCRIPT
{EN/DIS}
When enabled, causes the
MPS to assume the attached
device is a PostScript device
and act accordingly.
PSCONVERT
{EN/DIS}
When enabled, causes the
MPS to place a PostScript
wrapper around each text
job.
SOJ string
Causes the MPS to send a
start-of-job string to the
attached device before every
job. Enter a start string or
the word none.
TCPPORT
string
Specifies a raw TCP listener
socket for the service. Enter
a socket number (4000 to
4999) or the word none.
DEFINE SERVICE
“name” option
TELNETPORT
string
Specifies a TCP listener
socket for the service. Unlike
TCPport, this option
performs Telnet IAC
interpretation on the data
stream. Enter a socket
number (4000 to 4999) or
the word none.
DELAY num
Schedules a reboot after
num minutes. Enter a value
from 0 to 120.
CANCEL
Cancels an impending
initialization.
FACTORY
Reboots the MPS to its
factory default settings.
INITIALIZE option
NOBOOT
Forces the MPS to stop in
Boot Configuration Mode
rather than fully rebooting.

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English