18
Error Messages
Sprinter 150/150M/250M - 1.0.0en
EN
DE
FR
ES
NO
SV
FI
DA
IT
PT
NL
9. Error Messages
No. Error message Counter measure / causes
E99 System Error, Contact
Services !
Hardware faults or file errors or adjustment errors or setting errors rendering instrument not working prop-
erly.
E100 Low Battery ! Change to new or freshly charged batteries.
E101 Point No. Not Incre-
mented!
Change the PtID. Max. PtID is 99999999 and do not end any 8 characters string with an alphabet char-
acter.
E102 Too Bright ! Darken staff or reduce lighting on staff or shade the objective telescope.
E103 Too Dark ! Light up staff uniformly.
E104 No Staff ! Check targeting.
E105 Invalid Entry! Check the entry / input.
E106 Out Of Level ! Level the instrument.
E107 Memory Full! Set internal memory to OFF and continue measurement without recording OR download stored data to
an external device and continue measurement with internal memory ON after deleting all recorded data
in the internal memory.
E108 Data File Error ! Data file error.
E109 Low Memory! Prepare to download data to external device, in order to continue further measurement with recording ON
after deleting all recorded data in the internal memory.
E110 Target Too Close ! Move staff or instrument further apart.
E111 Target Too far ! Move staff or instrument closer together.
E112 Too Cold ! Stop working, external temperature is outside the instrument operating temperature.
E113 Too Hot ! Stop working, external temperature is outside the instrument operating temperature.
To Next Page
Loading...
Need help?
General
