5 of 23
4 of 23
9. INFO: View more information about the station or track playing. Press
again to cycle through further information screens then return to the normal
Now playing screen.
6. / [TUNE+] : Next: Press to select the next track under FM/DAB/
Bluetooth mode; Press and hold the Tune+ button 2 seconds to auto scan the
stations under the FM/DAB mode.
10. MENU: press the MENU to show the MENU for the current mode. Press again
to show now playing screen.
11. BACK : press the BACK to return to the previous screen.
5. : Press to select Play/Pause under internet radio, Bluetooth mode. In FM mode
Briefly press to do auto scan the stations.
12. SOURCE: Press to Source to select different modes internet radio, Podcasts,
Bluetooth and AUX In.DAB, FM,
8. SLEEP: When playing, press Sleep, M2P will back to set sleep time. When
playing, open the sleep menu to set the time interval before the unit is set to
Standby mode. When alarm is sounding, allows you to set the snooze interval.
7. ALARM: Press to Alarm, the screen will display Alarm 1 and Alarm 2; then
Rotate and press the SELECT button to select alarm 1 or alarm 2 to set up.
4. / [TUNE-] : Previous: Briefly press to select the previous track under FM/DAB
/ Bluetooth mode; Press and hold the Tune- button 2 seconds to auto-scan the
stations under the FM/DAB mode.
2. PRESET 1-2 : Long press 1,2 to preset and save the favorite stations
3. PRESET 3+ : Long press 3+ enter into preset list, you can preset 20 stations by
Briefly press 1-2 preset to select the favorite station or preset recall.
2.2 Connectors
As shown below has connectors (from left to right)for the followings:
e. POWER ON | POWER OFF STANDBY: When using Mains power, Briefly press to|
go to standby mode.
scrolling the preset list and push volume knob to achieve.
1. DC power in [9V]
2. Aux in [to connect external MP3 music source from the iPod or Pad
other device.
3. Headphone out for the headphone playback.
4. Battery compartment.
Note: If the battery is subject to storage for such a long term as more
than 3 months, it’s recommended to recharge the battery periodically.
3. Started and setup
M2P is easy to use. To play DAB or FM radio, all you need is a power source (a
100-240 V mains supply); For Music Player mode, you need a wired/wireless
Ethernet network and a UPnP music server (e.g. a PC). For Internet-
connected modes such as Internet radio, you also need a broadband Internet
connection.
power on / Long press this button
When powered by battery, long press this button to turn off the unit.
1 2 34
To Next Page
Loading...
Need help?
General
