8 of 23
WPS setup
WPS encrypted networks are identified by ‘[WPS]’ at the start of the network
name, and have two methods of connection. Select one and follow the
prompts. When using the network wizard an additional option to Skip WPS is
available.
Select one and follow the prompts:
Ÿ
M2P prompts you to press the connect button on the router. It then press the
Push Button
3.1.3 Network
M2P is compatible with all common network protocols and encryption
methods, including Wi-Fi Protected Setup (WPS).
select control.
9 of 23
Ÿ Pin > (code number)
M2P generates an 8-digit code number which you enter into the wireless
router, access point.
Ÿ Skip WPS >
Enter key as for a standard encrypted network, above. For more information
on setting up a WPS encrypted network, see your WPS router’s instructions.
On completion
M2P connects to the selected network.
If connecting fails, M2P returns to a previous screen to try again. To exit the
process use the Back/Menu button.
3.2 Other settings
Sections for those modes. Common settings are covered below.
3.2.1 Equalizer
Several preset EQ modes are available; also a user-defined setting (My EQ).
To choose an EQ setting, select Menu >System settings > Equalizer. You can
then choose from a variety of preset modes and My EQ
The last option ‘My EQ profile setup’ allows you to define your own settings
for the ‘My EQ’ option, with custom bass, and treble settings.
with password key if set Select WLAN region/country >Wi-Fi network (SSID),
and then select a network from the list.
To connect M2P to your network, you need a Wi-Fi wireless router, together
3.2.2 Network
M2P remembers the last four wireless networks it has connected to, and
automatically tries to connect to whichever one of them it can find. You can
see the list of registered networks through Menu > System settings >Network
> Network profile >From here you can delete unwanted networks by turning
and pressing Select then confirming delete Yes.
There are also other options for viewing and manually altering network
settings from Menu > System settings > Network > (for example setting up a
wired network).
Users experienced with networking may find these options useful for
diagnosing and fixing network problems.
3.2.3 Language
The default language is English. To change, select Menu > System settings
> Language >then select your language.
To Next Page
Loading...
Need help?
General
