Lennox PRODIGY2.0 User Manual

98
24.2.3. Setup
Table 57. Menu Interface (Level 1 - SETUP)
Level 2 Level 3 Level 4 Level 5 Level 6 Level 7
INSTALL
LANGUAGE = = ENGLISH, ESPANOL, OR FRANCAIS
DATE/TIME = = DAY, MONTH, YEAR, HOURS, MINUTES, SECONDS
DISPLAY UNITS F/C = FAHRENHEIT OR CELSIUS
MODEL NUMBER = LOCATED ON UNIT NAMEPLATE.
CONFIGURATION ID 1
SEE WHITE STICKER TITLED “ORIGINAL FACTORY UNIT CONFIGURATION” LOCATED ON
THE RIGHT SIDE OF THE CONTROL BOX NEAR THE M3 CONTROLLER.
CONFIGURATION ID 2
WHITE STICKER TITLED “ORIGINAL FACTORY UNIT CONFIGURATION” LOCATED ON THE
RIGHT SIDE OF THE CONTROL BOX NEAR THE M3 CONTROLLER.
CATALOG NUMBER LOCATED ON UNIT NAMEPLATE
SERIAL NUMBER LOCATED ON UNIT NAMEPLATE
RTU DESCRIPTION = UP TO 18 ALPHA/NUMERIC CHARACTERS
DEHUMIDIFIER MODE
= BLOWER, OCCUPIED
= LOCAL SENSOR,
NETWORK SENSOR
DEHUMIDIFIER DEHUMID SETPOINT =
X.XX %
DEHUMIDIFIER DEHUMID DEADBAND =
X.X %
= REHEAT DI4
= NO CONDITIONS
= LOCAL SENSOR
OR NETWORK
SENSOR
DEHUMIDIFIER DEHUMID SETPOINT =
X.XX %
DEHUMIDIFIER DEHUMID DEADBAND =
X.X %
= REHEAT DI4
= REPORT RH ONLY = LOCAL SENSOR OR NETWORK SENSOR
= DISABLED
= BLWR, OCC, PREV
COOL
= LOCAL SENSOR
OR NETWORK
SENSOR
DEHUMIDIFIER DEHUMID SETPOINT =
X.XX %
DEHUMIDIFIER DEHUMID DEADBAND =
X.X %
= REHEAT DI4
= PREVIOUS COOLING
= LOCAL SENSOR,
OR NETWORK
SENSOR
DEHUMIDIFIER DEHUMID SETPOINT =
X.XX %
DEHUMIDIFIER DEHUMID DEADBAND =
X.X %
= REHEAT DI4
NOTE: PARAMETERS AVAILABLE ARE DEPENDENT ON MODEL NUMBER AND CONFIGURATION ID 1 AND 2 SETTINGS

Lennox PRODIGY2.0 Specifications

General

Brand	Lennox
Model	PRODIGY2.0
Category	Controller
Language	English