Lenze c550 User Manual

3.4 Backplane bus
The I/O system 1000 can be directly connected to the integrated backplane bus. The individual
modules of the I/O system are parameterized in the »PLC Designer«.
Only EPM-Sxxx I/O compound modules from hardware version 1B onwards are
supported.
Detailed informaon on the I/O system 1000 can be found in the corresponding
documentaon: www.Lenze.com à Downloads
When using I/O terminals on the backplane bus, the EPM-S701 power supply
module is required as the rst module.
3.5 Licence informaon
Lenze Soware may contain soware elements that are licensed as free
soware or open source. The licensing terms and condions of the open source
soware components used in this product can be found in the "License"
directory on the SD card included in the product.
Product informaon
Backplane bus
13

Lenze c550 Specifications

General

Brand	Lenze
Model	c550
Category	Controller
Language	English