Lenze c550 User Manual

6.6 Device commands
The response of the controller unit can be controlled using device commands that are dened
in the parameter objects.
Device commands for the logbook
The controller has a logbook. The events that occur in the controller are saved in the logbook.
4Logbook ^ 94
The following device commands are available to the logbook:
•
Delete logbook 40x2022:015
•
Export logbook data 40x2022:036
•
Delete log les 40x2022:037
Device commands for the applicaon
The technology applicaon can be reset to the factory-set default sengs, started and
stopped.
•
Load factory-set default sengs of the technology applicaon 40x2022:039
•
Start technology applicaon 40x2022:044
•
Stop technology applicaon 40x2022:045
Addional device commands
If parameter sengs of the controller are changed, then these modicaons are applied
inially only in the RAM memory of the device. Use the "Save user data" device command to
save the parameter sengs on the SD card. 40x2022:003
Use the "Restart device" device command to restart the controller from any state.
40x2022:035
Use the "Reload boot project" device command to reload the boot project. 40x2022:046
Use the "Load default sengs" device command to reset all the parameters in RAM memory
to the factory-set default sengs. 40x2022:001
Parameters (short overview)
The following table shows all the parameters for device commands. The device commands are
described in detail in the following subchapters.
Address Name Default seng
0x2022:001 Device commands: Load default sengs O / ready [0]
0x2022:003 Device commands: Save user data O / ready [0]
0x2022:015 Device commands: Delete logbook O / ready [0]
0x2022:035 Device commands: Restart Device O / ready [0]
0x2022:036 Device commands: Export Logbook O / ready [0]
0x2022:037 Device commands: Delete Logles O / ready [0]
0x2022:039 Device commands: Load TA default sengs O / ready [0]
0x2022:044 Device commands: Start applicaon O / ready [0]
0x2022:045 Device commands: Stop applicaon O / ready [0]
0x2022:046 Device commands: Reload boot project O / ready [0]
Device sengs
Device commands
29

Lenze c550 Specifications

General

Brand	Lenze
Model	c550
Category	Controller
Language	English