Lenze EVS9322-ES User Manual

Appendix
11-2

BA9300SU EN 2.1
11.2 Application examples
11.2.1 Speed control
The most important settings (short setup)
Note!
The following codes are contained in the menu: ”Short Setup / Speed mode” of the Module 9371
BB or in the menu: ”Short commissioning / Speed operation” of GlobalDrive Controlor LEMOC 2.
Input motor type (contains all nameplate data of the motor)
C0173 xxx Enter UG limit (mains voltage)
C0086 xxx Enter LENZE motor type
Enter maximum motor current
C0022 xxxA Determine Imax
Enter controller configuration
C0005 1000 Select speed control
C0025 xxx Enter feedback system
Speed setpoint settings
C0011 xxx rpm Determine max. speed
C0012 xxx s Set acceleration time
C0013 xxx s Set deceleration time
C0105 xxx s Set QSP deceleration time
Application parameters
C0070 xxx Vp n controller
C0071 xxx Tn n-controller
Save parameters
C0003 xxx Save all parameters

Lenze EVS9322-ES Specifications

General

Brand	Lenze
Model	EVS9322-ES
Category	Servo Drives
Language	English