These Instructions are valid for 93XX controllers as of version:
33.93XX- EI 2x. 0x (9321 - 9332)
33.93XX- CI 2x. 0x (9321 - 9328)
Type
Design:
Ex = Enclosure IP20
Cx = Cold Plate
xI = Servo PLC
xK = Cam profiler
xP = Position controller
xR = Register controller
xS = Servo inverter
Hardware version and index
Software version and index
Version
Explanation
What is new / what has changed?
Material No. Version Important Contents
411918
1.0 10/99 TD06 1st edition
1.4 05/01 TD02 2nd edition
E 2001 Lenze GmbH &Co KG
No part of this documentation may be reproduced or made accessible to third parties without written consent by Lenze GmbH & Co KG.
AllindicationsgivenintheseOperatinginstructionshavebeenselectedcarefullyandcomplywiththe hardwareandsoftwaredescribed.Nevertheless,devia-
tions cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur. We will include necessary correctionsin
subsequent editions.
To Next Page
Loading...
Need help?
General