Parameter data transfer
DRIVECOM parameter data channel
Error codes (DRIVECOM)
8
61
EDS82ZAFPC010 EN 4.0
8.1.4 Error codes (DRIVECOM)
Data 1 Data 2 Data 3 Data 4 Meaning
0x06 0x03
0x00
0x00 No right to access
0x06 0x05 0x10 Impermissible job parameter
0x06 0x05 0x11 Invalid subindex
0x06 0x05 0x12 Data length too large
0x06 0x05 0x13 Data length too small
0x06 0x06 0x00 Object is no parameter
0x06 0x07 0x00 Object does not exist
0x06 0x08 0x00 Data types do not correspond
0x08 0x00 0x00 Job cannot be executed
0x08 0x00 0x20 Job cannot be executed at the moment
0x08 0x00 0x21 Not executable because of local control
0x08 0x00 0x22 Not executable because of device status
0x08 0x00 0x30 Out of value range/parameter can only be changed with inhibited
controller
0x08 0x00 0x31 Parameter value too large
0x08 0x00 0x32 Parameter value too small
0x08 0x00 0x33 Subparameter out of value range
0x08 0x00 0x34 Subparameter value too large
0x08 0x00 0x35 Subparameter value too small
0x08 0x00 0x36 Maximum value smaller than minimum value
0x08 0x00 0x41 Communication object cannot be mapped on process data
0x08 0x00 0x42 Process data length exceeded
0x08 0x00 0x43 General collision with other values
0x08 0x00 0xFE 0x01 Invalid service (no read or write request)
To Next Page
Loading...
Need help?
General
