Adding available options in the print driver
For Windows users
1 Open the printers folder.
2 Select the printer you want to update, and then do either of the following:
• For Windows 7 or later, select Printer properties.
• For earlier versions, select Properties.
3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
4 Apply the changes.
For Macintosh users
1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2 Navigate to the list of hardware options, and then add any installed options.
3 Apply the changes.
Available options
MarkNet
TM
N8372 802.11a/b/g/n/ac Wireless Print Server Interface Card
Note: Supported only in the Lexmark MC3426adwe printer model.
Set up, install, and configure 47
To Next Page
Loading...
Need help?
General
