Networking
Installing the printer on a wireless network
Wireless network compatibility
Your printer contains an IEEE 802.11n wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers
that are Wi-Fi certified.
Supported network security options
The printer supports three wireless security options: WPA2/WPA, WEP, and no security.
WPA2/WPA
WPA (Wi-Fi Protected Access) and WPA2 (Wi-Fi Protected Access 2) offer stronger wireless network security than
WEP. WPA2 and WPA are similar types of security. WPA2 uses a more complex encryption method and is more
secure than WPA. Both WPA2 and WPA use a series of characters, called the WPA pre‑shared key or passphrase, to
protect wireless networks from unauthorized access.
WPA2/WPA passphrases must be:
• Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.
or
• From 8 to 63 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a
keyboard. ASCII characters in a WPA passphrase are case-sensitive.
Every device on the wireless network must use the same WPA passphrase. WPA security is an option only on
infrastructure networks with access points (wireless routers) and network cards that support WPA. Most newer
wireless network equipment also offer WPA2 security as an option.
Note: If your network uses WPA2 or WPA security, then select WPA Personal when you are prompted to select the
type of security your network uses.
WEP
WEP (Wired Equivalent Privacy) is the most basic and the weakest type of wireless security. WEP security relies on a
series of characters called the WEP key.
Every device on the wireless network must use the same WEP key. WEP security can be used on both ad hoc and
infrastructure networks.
A valid WEP key has:
• Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.
or
• Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a
keyboard.
Networking
98
To Next Page
Loading...
Need help?
General
Weight and Dimensions
