PREPARATION
Setting Up Your TV
Please set it up carefully so the product does not fall over.
■ You should purchase necessary components to x the TV to the wall.
■ Position the TV close to the wall to avoid the possibility of falling.
■ The instructions shown below are a safer way to set up the TV, which is to x it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb or hang from the TV.
Use the eye-bolts or TV brackets/bolts to x the TV to the wall as shown in the picture.
(If your TV has bolts in the holes, loosen these bolts.)
* Fix the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
Use a sturdy rope to tie the TV. It is safer to tie the rope horizontally between the wall and the TV.
NOTE
When moving the TV, untied the rope rst.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To set up TV safely, make sure that the height of the bracket on the wall and on the TV are the same.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
