Stand Installation
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.
(Only 26LG30**)
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
Assemble the TV as shown.
Assemble the parts of the Stand Body with
the Cover Base of the TV.
Fix the 4 bolts securely using the holes in
the back of the TV.
Stand Body
Cover Base
(Only 19/22LG30**)
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.