TIME MACHINE (PAUSE &
REPLAY OF LIVE TV)
This function allows the unit to automatically
record live TV and make it available for viewing at
any time.
With the Time Machine turned on, you may pause
and rewind normal TV viewing at any time without
missing any of the live broadcast.
Time Machine and Recording functions may not
work if the signal strength is weak.
This function is only operated after initializating
USB Device.
Connecting USB storage devices
B IN 2
Time Machine Ready
USB IN 1
ie)
1
Connect the USB device to the
USB IN 1/
TimeMachine Ready
jacks on the side of TV.
2
To use the USB device (over 40 GB) for
Timemachine, execute USB hard disk
Initialization.
NOTE
It initializes the HDD connected to the USB
as disk mode for Timemachine.
It is activated only when the USB HDD
available for Timemachine is connected.
When USB Device Initialization is executed,
all the data stored in the USB device is
deleted.
While performing USB Device Initialization,
do not remove the USB device. It may cause
error on the TV and the storage device.
USB device Initialization
!
É
!
É
1
Connect an unformatted USB for Time
Machine and press
REC
to initialize the USB
device.
2
Press the Navigation buttons to scroll to
OK
and press
ENTER
.
3
Press Navigation buttons to scroll to
On
or
Off
and press
ENTER
.
NOTE
When initialization is completed, a popup
notice of completion is displayed and
the connected USB HDD is available for
Timemachine.
Depending on the capacity of the USB
device, the initialization time may vary.
The initialized USB device is not recognized
by the PC.
When a USB device of less than 40 GB is
connected, the USB Device Initialization is
not activated.
Supported maximum external HDD size for
back-up is up to 1TB.
75
ENG
ENGLISH
ENTERTAINMENT