B2000
User Guide
47
Settings [Menu 4 ]
Network settings [Menu 4-5]
You can select a network which will be registered
either automatically or manually. Usually, the network
selection is set to Automatic.
Automatic [Menu 4-5-1]
If you select Automatic mode, the phone will
automatically search for and select a network for you.
Once you have selected “Automatic”, the phone will be
set to “Automatic” even though the power is off and on.
Manual [Menu 4-5-2]
The phone will find the list of available networks and
show you them. Then you can select the network
which you want to use if this network has a roaming
agreement with your home network operator. The
phone let you select another network if the phone fails
to access the selected network.
Preferred [Menu 4-5-3]
You can set a list of preferred networks and the phone
attempts to register with first, before attempting to
register to any other networks. This list is set from the
phone’s predefined list of known networks.
GPRS setting [Menu 4-6]
You can set GPRS service depending on various situation.
Power on [Menu 4-6-1]
If you select this menu, the phone is automatically
registered to a GPRS network when you switch the
phone on. Starting a WAP or PC dial-up application
created the connection between phone and network
and data transfer is possible. When you end the
application, GPRS connection is ended but the
registration to the GPRS network remains.
When needed [Menu 4-6-2]
If you select this menu, the GPRS connection is
established when you connect a WAP service and
closed when you end the WAP connection.
Reset settings [Menu 4-7]
You can initialize all factory defaults. You need
Security code to activate this function.
To Next Page
Loading...
Need help?
General
