B2000
User Guide
20
In call Menu
1-6 Muting the Microphone
You can mute the microphone during a call by pressing
the [Options] key then selecting Mute.
The handset can be unmuted by pressing the
[Unmute].
When the handset is muted, the caller cannot hear
you, but you can still hear them.
1-7 Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, for example, to
allow your handset to make use of an automated
switchboard, select [Options], then DTMF On.
DTMF tones can be turned off the same way.
1-8
Calling up Messages and SIM Tool Kit main menu
The Messages and SIM Tool kit main menu options
can be reached from the in-call menu by selecting
[Options]. SIM Tool Kit menu is shown only when SIM
in the handset supports SIM Tool Kit service.
2 Multiparty or Conference Calls
The multiparty or conference service provides you
with the ability to have a simultaneous conversation
with more than one caller, if your network service
provider supports this feature.
A multiparty call can only be set up when you have one
active call and one call on hold, both calls having been
answered. Once a multiparty call is set up, calls may
be added, disconnected or separated (that is, removed
from the multiparty call but still connected to you) by
the person who set up the multiparty call.
The maximum callers in a multiparty call is five. Once
started, you are in control of the multiparty call, and
only you can add calls to the multiparty call.
2-1 Making a Second Call
You can make a second call while you are already in a
call. To do this, enter the second number and press
[Send]. When you get second call the first call is
automatically put on hold. You can swap between calls
by selecting [Options] then Swap.
2-2 Setting up a Multiparty Call
You can connect a call on hold to the currently active
call to form a multiparty call by selecting [Options]
then Multiparty / Join all.
2-3 Putting the Multiparty Call on Hold
To put a multiparty call on hold, select [Options]
then Multiparty / Hold all.