TRAINING MANUAL
DLEX8377WM
DLEX8388WM
Page 41
STEAM DRYER
GAS CONVERSION (Natural to Propane)
WARNING! Improper installation and/or adjustment of orifices and gas valves
can result in fire, explosion, and suffocation. Installation and adjustment
should be performed ONLY by a trained, licensed, and certified gasfitter.
NOTICE! The dryer is shipped from the factory equipped for natural gas.
1. Close the adjustment screw.
There is a nut on the adjustment screw.
This nut is secured to the thread with a
sealing compound. The nut is pre-
positioned to the place the valve would be
properly adjusted for LP. Its purpose is to
provide a shoulder for positioning the
adjustment screw if the dryer is converted
from natural gas to propane.
NOTE: The conversion should be
performed by a licensed and certified
gasfitter or other trained, qualified servicer.
To Next Page
Loading...
Need help?
General
