TRAINING MANUAL
DLEX8377WM
DLEX8388WM
Page 48
STEAM DRYER
GUIDE ASSEMBLY
Remove the two screws along the frame
rail. (The ones toward the middle rather
than on the ends.)
Disconnect the hose from the steam
orifice on the back of the dryer. (Use
water pump pliers to remove the hose
clamps.)
Push the water system guide assembly
toward the back of the dryer and lift it
from the dryer.
Remove the hoses from the pump and the
steam generator. (Use water pump pliers
to remove the hose clamps.)
Lift the pump and the steam generator
out of the assembly housing.
To Next Page
Loading...
Need help?
General
