LG DLEX8388WM User Manual

TRAINING MANUAL DLEX8377WM
DLEX8388WM
Page 53
STEAM DRYER
FRAME BODY and PANEL FRAME
Remove the four screws that hold the
water assembly rail in place. There are two
screws on each end.
Remove the two screws on the front panel
frame.
Remove the two screws from the top of the
front panel frame.
Remove the panel frame from the front of
the dryer by lifting it slightly and
disengaging the tab on each end from the
slot in the dryer frame.
TUB FRONT (FRONT BULKHEAD)
Remove the top plate.
Remove the front cabinet.
Disconnect the door lamp (top) and
electrode sensor (bottom).
Remove the four screws holding the front
assembly.
Lift the tub front up and away.

LG DLEX8388WM Specifications

General

Brand	LG
Model	DLEX8388WM
Category	Dryer
Language	English