TRAINING MANUAL
DLEX8377WM
DLEX8388WM
Page 47
STEAM DRYER
FRONT CABINET
Remove the top plate.
Remove the control panel.
Remove the door, if necessary for the
repair. Set it aside on a soft, protective
surface.
Remove two screws in the bottom of the
door opening.
Remove four screws from the top of the
front cabinet.
Tilt the front away from the dryer and
disconnect the door switch wire harness.
DOOR REVERSAL
Remove two screws that hold the door.
Remove the door and set it aside on a soft,
protective cloth. Save the hinge shim.
Remove two screws near the latch.
Remove two screws and the latch piece.
Rotate everything 180° and reinstall so
the door opens from the other side.
To Next Page
Loading...
Need help?
General
