LG DLEX8388WM User Manual

TRAINING MANUAL DLEX8377WM
DLEX8388WM
Page 54
STEAM DRYER
DRUM, BELT, and PULLEY
Remove the drum front.
Reach in and remove the belt from the
motor and pulley.
Lift the drum out through the front of the
dryer. The belt will still be around the
drum.
To replace the drum, put the belt around it
and set into the dryer to rest on the two
rubber wheels on the tub back. Let the belt
hang.
Replace the tub front, holding the drum up
so it can set on the two rubber wheels on
the tub front.
Make sure the belt is around the
circumference of the drum near the point
where it usually rides.
Reach in through the front or the side and
loop the belt around the motor shaft and
the pulley. Rotate the drum by hand a
couple of turns to seat it.

LG DLEX8388WM Specifications

General

Brand	LG
Model	DLEX8388WM
Category	Dryer
Language	English