59
5. Touch a setting.
TTY Full:
 Users who cannot talk and
hear can send and receive a
text message through TTY
equipment.
TTY + Talk:
 User
s who can talk but cannot
hear receive a text message
and send voice through TTY
equipment.
TTY + Hear:
 Users who can hear but cannot
talk send a text message and
receive voice through TTY
equipment.
TTY Off:
 Users communicate without
TTY equipment.
Connecting TTY Equipment and
a Telephone
1. Connect the TTY terminal to
the phone using a TTY cable.
(Use the headset jack to
connect to the phone.)
NOTE The first time you use TTY
mode, a pop -up saying
"Enabling TTY will disable
headset audio." will be displayed
on the screen. Touch
OK
.
2. Enter the phone's Call Settings
menu and set the desired TTY
mode.
3. After setting a TTY mode, check
the phone's LCD screen for the
TTY icon.
4. Connect the TTY equipment to
the power source and turn it on.
5. Make a phone connection to
the desired number.
6. When connection is made, use
the TTY equipment to type
in and send a text message or
send voice.
7. The voice or text message from
the receiver end displays on the
TTY equipment display.
6.8 One Touch Dial
Allows you to initiate a speed dial
call by touching and holding the
speed dial digit on the dialpad. If
set to Off, designated Speed Dial
numbers will not function.
1. Swipe your finger across the
screen in any direction to unlock
and touch the Menu Key
.
2. Touch Settings
.
3. Touch Call Settings.
To Next Page
Loading...
Need help?
General
