8
ENGLISH
Prepare Live TV
Watching TV broadcasting
1 Connect the broadcast antenna/cable to the projector. You may also connect
a piece of equipment that can receive broadcasting such as a set-top box
instead of the antenna/cable. Press the button on the remote control. To
see the details, select Set-Top Box from the device list that is displayed when
operating the Device Connector.
2 Start the (Q. Settings) Channels Channel Tuning Auto
Tuning. Finds and adds only channels being broadcast.
Network Setting
Network Setting
If you congure settings for the network, you can use various services such as
online contents and applications.
Setting a Wired Network
1 Connect the LAN port of the projector and the router using a LAN cable. The
router should be connected to the Internet beforehand.
2 Press the (Q. Settings) button on the remote control and select
Network Wired Connection (Ethernet). This will start the wired network
connection.
• If the router supports DHCP, the projector is automatically connected to the
network when you connect the projector to the network with a LAN cable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
