30
PROGRAMMING MODE
4-2. Sense Dry Setup
Sense Dry Setup can be used to enable/disable sense dry.
Sense Dry Setup
Display
Enter SVC Mode
Press 1st button
Press 2nd button
Press Start button
Press 2nd button or 3rd button Until display shows
Press Start button
Press 2nd button or 3rd button Until display shows
Press Start button
Select the features you want
Button functions :
Start button = Select
1st button = Go back a step
2nd button = Move up
3rd button = Move down
Press Start to enable or disable The next menu setting will be displayed.
To Next Page
Loading...
Need help?
General
